Product Price :Get Latest Price
Receivers are available in 26 standard models with an internal gross volume of 4.4 to 329.1 cubic feet and a pump down capacity of 130 to 9740 pounds based on 80% of internal volume with liquid refrigerant at 90° F. Ammonia or fluoridated receivers are made from carbon steel shell and carbon steel dished ends. Shells up to 300 mm (12") are made from seamless or welded pipes and above 300 mm, they are made from rolled plates.
Range : The diameter vary from 200mm(8") to 1200mm (48") and the lengths vary from 1.5 Meters(5') to 7.5 Meters (25').
Product Price :Get Latest Price
Our scrubber type oil separators are designed for vertical mounting in the compressor discharge line of commercial and industrial refrigeration systems to separate entrained oil from the discharge gas and a automatically return this oil to the compressor crankcase. Oil separators are made from Carbon Steel shell and carbon steel dished ends. Shells up to 300 mm (12") are made from seamless or welded pipes and above 300 mm, they are made from rolled plates.
Range :Two types of oil separators are available. One with automatic oil return and other without automatic oil return. The diameters vary from 200 mm(8") to 600mm (24") and lengths vary from 1 meter(3') to 1.5 meter(5').
Product Price :Get Latest Price
These are made from carbon steel/ low temperature steel plate shell and carbon steel/ low temperature steel dished ends. Shells upto 300 mm (12") are made from seamless/ welded pipes and above 300mm, they are made from rolled plates.
Range : The diameters range from 250mm(10") to 600mm (24") and lengths vary from 1 meter(3") to 1.8 meter(6").
Product Price :Get Latest Price
Liquid and gas coolers are available in ten standard sizes through a capacity range of 15 to 1000 tons of ammonia refrigeration. Designed for installation in the booster discharge line, the gas and liquid coolers sub cools liquid ammonia from the receiver for the low stage load while desuperheating booster discharge gas to the high stage compressor. Desuperheating of booster discharge gas is necessary to prevent overheating of the high stage compressor. Sub cooling of liquid refrigerant for the low stage load is essential to obtain economical thermodynamic efficiency of the refrigeration cycle. Our gas and liquid coolers performs both of these functions efficiently.Product Price :Get Latest Price
Owing to our expertise in this domain, we are able to supply different types of Dish End. Having many different capacities of hydraulic presses at our disposal the fabrication process is carried out adhering to the international norms and quality checks. These dished end are application specific and can be developed in single piece, crown and petal formation. In accordance with the customers requirements, the diameter, thickness can be fabricated. During blank formation and pressing of Dished ends, strict quality control is practised. We specialise in supply of Dished Ends for pressure vessels, boilers, water storage tanks etc. as per international standards. Dished ends are available in multiple head options which include Ellipsoidal/elliptical, Hemispherical, Torispherical and Toriconical. The welding procedure followed in the manufacturing of our range of dished end is as per the ASME IX standards.
Some of the other details about our dished ends are mentioned below:
Explore More Products
© Super Refrigeration ( India ) Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited