Freon Refrigeration Equipment

Product Price :Get Latest Price

R22, R134a, R404A, R507, R410A, R407C, R508B, Version 50 Hz / 60 Hz

• Compressor for three phase current
• Compressor for single phase 230 V/1/50Hz with fitted starting device and run capacitor
• Condenser with grooved copper tubes and Aluminium Fins, Generously sized liquid receiver
• High & low pressure cut-out including mounting brackets, wired to terminal strip, Electrical wiring to the connection box IP65
• Operating pressure up to 28 bar
• High cooling capacity with reduced power consumption
• Full exploitation of the finned package due to the careful matching of the high capacity external rotors fans
• Fans with especially efficient low noise external rotor motors single phase
• Pre-charged with eater oil for R134a and R404/R507A
• Designed for extremely high ambient condition up to 65 0C /750 

Product Price :Get Latest Price

• Sea bird semi hermetic reciprocation compressors
• Low noise and vibration
• Suction gas distribution with liquid protection
• Oil separator with level sight glasses
• Return sight glass and filter
• Mechanical or electronic oil management system with oil injection, safety cut out and alarm
• Motor protection device
• Liquid receiver with level sight glasses
• Inlet and outlet isolation valves
• Provision for electrical board
• Solid metal frame
• Discharge line protection
• Raised compressor mounts for service
• High pressure switch safety per compressor
• Low pressure switch common per system
• IS0 9001 & better control assembly

Optional Components : available on request

• Additional pressure controls
• Suction and /or liquid isolation valves
• Liquid filled pressure gauges with isolation valves
• Compressor crankcase heater
• Liquid receiver level alarm
• Cylinder head unloading
• Discharge vibration eliminators (Recommended)

Electrical Components

• Separate contractor for LP and HP cutout
• Electrical board with contractors, overloads pressure controlled
• Electronic compressor/condenser management
• Remote system monitoring
• Phase failure/ Phase reversal/Voltage and Current unbalance protection devices

Condensers

• Sea bird water cooled
• Air cooled

Benefits

Sea Bird Rack SMK Series are equipped with latest Sea bird Semi Hermetic Compressor with highest possible refrigeration efficiency with flexibility, High energy efficiency, return on investment and durability have been all considered and perfectly balanced during design and with lowest operation cost for all food retailer, cold room and blast freezer. With different compressor combination Sea Bird rack Product are perfect solution to his customer with best economical cost. With well trained staff, Sea Bird is able to provide innovation, reliability and extended operating life through use of each individual component of a best quality and total engineered package for customers

Product Price :Get Latest Price

2, 4 and 6 cylinder series the leading technology with displacement from 4 to 151.6 3 m3 /h (50Hz)

Universal

• R134a, R404A, R507, R407C, R22, R410A and R508B
• One compressor version
• For all refrigerants
• For air-conditioning or
• For medium and low temperature

Large application range

• Low temperature R404A/R507A possible over a wide application range without additional cooling

High cooling capacity and minimum energy requirements

• Highly efficient working valves
• Minimum dead space
• Efficient, large volume motor
• Universally suitable motor insulation

Product Price :Get Latest Price

Open Type Reciprocating Compressors AK-2N, AK-4N, WAK-2N, WAK-4N

Open Type Reciprocating Compressors 200/IIIL, 250/IVL, 300/VL, AK6, AK7.5

R22, R134a, R404A, R507, R717 (NH3)

Technical Highlights of SEABIRD

• This model series has been further developed from the proven two, four and six cylinder series after extensive research
• By a number of ways it has been possible to improve again refrigerating performance, efficiently and operating reliability and to conceive once again a further – oriented new compressor generation
• Displacement from 15.17 m3/hr to 151.6 m3 /hr
• Crankshaft with special surface finish. Optimized aluminium piston shape and Chromium – plate piston rings guarantee low frictional losses and long services life
• High efficient, extremely robust valve plate design as the result of newly developed valve plat from Germany
• Pressure Oil lubrication by means of reversible gear pump
• Shaft seal cooled by a pressurized oil stream and also by the suction gas flow resulting in excellent stability and insignificant thermal load, replaceable without dismounting the compressor

Optional Extra

• Water-cooled cylinder heads
• Additional fan
• Crankcase heaters
• Adapter for oil and gas equalization

Product Price :Get Latest Price

Suspension type air cooler

R22, R134a, R404A, R407C, R507, R410A

Application

S type serial Air cooler is classified in accordance with the cold storage temperature. SJ type of high temperature is applicable for cold storage above 00C, keeping fresh food such as vegetables, fruits and eggs. SP type of medium temperature, for cold storage around – 180C, Keeping food such as meat and aquatic products. SL type of low temperature, for -250cold storage, used for freezing fresh meat, fish products and other fast frozen items.

Structure Features

• Coil: use new high efficient aluminium wave fin, high heat conductivity, fast water discharge; use high efficient copper pipe, high heat transfer; use new liquid distributor, uniform frost
• Fan: low cost, high reliability, lower temperature- resistant and low noise external Rotor fans
• Defrost: use electric heating stainless steel pipe, high leak proofness at the end, anti-electric leakage and long life
• Casing: use aluminium plate and stainless steel or cold plastic spraying plate, nice appearance and durable
• Maintenance: flexible to disassemble and lean

Product Price :Get Latest Price

R22, R134a, R404A, R407C, R507, R410a, R508B

Capacity from 1.3 tons to 221 tons in two pass and 1.1 tons to 176 tons in four pass condenser

Heat-exchanger tubes: made of copper or copper nickel (Seawater-resistant design) with newly developed tube geometric and low fouling profile on the coolant side.

Shell and punched plates are made of boiler plate

Suitable for (H) CFC/HFC refrigerants

Maximum allowable pressure / allowable temperature.

Refrigerant side : 33 bar / -100C to 1200C

Coolant side : 10 bar / -100 (anti-freezing-point) to 950C

Detachable, permits mechanical cleaning of the pipes connecting and baffle side are interchangeably

Drain plugs

Seawater resistant design (optional):

Copper-Nickel Tube, Plastic Coated End Cover

Options :

• Sight glass
• Pressure Relief Valve
• Inlet Rotolock Valve

Product Price :Get Latest Price

Our Banana Ripening chambers are engineered to stimulate nature's ripening process without altering the taste or Freshness.

For excellent and best ripening of Banana,mango,papaya and other fruits following parameteres are required .

• Banana Ripening chamber with proper insulation and flooring.
• Proper capacity  make refrigeration machines with desired temperature.
• Proper uniform  air cirulation system.
• Exact humidity level in chamber.
• Natural and govy approved ethylene system with proper concentration level of ethylene.
• Fresh air intake and exhaust system.
• CO2 level controlling as per NHB standard.

You can Trust us we will give you best product ,economical, and best deal ,which will suite your complete requirment .

Features:

• High humidity coil evaporator with built-in pre-cooling capability.
• We are making ripening chambers as per NHB standards.
• We are giving high CFM fans for uniform air flow sothat uniform ripening of banana ,mango,papaya can takes place 
• Remote operation of the ripening chambers.
• Pressurised and pull through air flow models
• Gas based ethylene injection and liquid based generator option
• We are also giving ethylene generator based solution for ripening .
• We are giving small ethyelene spray bottles to ripen the banana 
• CFC free refrigeration system in auto operation.
• CO2 evacuating system with automatic controls
• Web-based monitoring system (optional).
• You can take excellent product in economical prices with full range of ripwning solutions.

We provide the Ripening chamber that has been designed with a number of fundamental design and user issues in mind such as energy efficiency, user friendliness, ease of loading/unloading, good lighting and safe and easy maintenance access. The result is a ripening system which is as hygienic in its appearance as it is practical and efficient in operation. At the same time as improving product appearance without dehydration, our fruit ripening system enhances the colour, taste and quality of your product.

Temperature Range:-

• Chiller           12 to 25 deg C

Door Option:-

• Flush type
• Overlap type
• Sliding type

Floor Type:- 

• Panel with AL ch. sheet
• Puff slabs with Kota stone

Insulation Material:-

• Puff (highly heat resistant material)

Features:-

• Wide temperature range and capacity
• Pre-fabricated panels for easy assembly, cam lock in tongue and groove assembly
• Food safe and CFC free
• Micro-processor based electronic control panel board, digital temperature indicator
• Energy efficient refrigeration systems attuned to suit high ambient conditions

Special Features:-

• Extra size condensor means, more cooling more C.O.P.,less power consumption
• Tropicallized designing to perform in 50 deg C ambient conditions.
• High capacity suction fans which can carry more suction heat and maintain humidity in cold room automatically.
• Fully automatic electric/air defrost system.
• Extra size condensor results low head pressure which means trouble free operation in summer
• Special humidifiers are provider for better rapping of fruits. (Banana, Mango, Pipa)
• Ethylene Generator are provider for better Quality of fruits. Central ripening fully automatic system with Co2 Sensor with fresh air intake and exhaust also provided.

Product Price :Get Latest Price

A blast Freezer is a freezer which is extremely cold. It may also be known as a shock freezer. Such freezers are intended to rapidly bring the temperature of foods down, freezing them extremely quickly. These specialized freezers are used in the frozen food industry and they are also utilized in some commercial kitchens for speciality tasks.

When Food is frozen, the water inside it crystallizes. If freezing takes place at relatively warm temperatures, the ice crystals which forms will be large.

Advantages of Blast Freezing

• Rapid temperature reduction prevents the production of microorganisms
• Increase shelf-life of products
• Appearance, flavour, texture and nutritional value remain as natural.
• High and constant quality
• Reduction in electricity consumptions
• Presentation of large ice crystals which can damage food
• Reduced kitchen wastes as unused portions can safely be stored for later use.
• Increase kitchen efficiency lets you prepare large batches and use some portions later.
• Cost effective operation & maintenance
• Production always available for the sale